TOKU Impact wrench 3/4,1

MI-20P, MI-2000P, MI-2000GS,GL, MI-2500P(3/4), MI-2500GS/GL(3/4),
MI-2500P(1"), MI-2500GS,GL(1")
MI-3800P, MI-3800GS/GL, MI-38GS/GL, MI-42GS/GL
MI-5000GS/GL, MI-5000P, MI-5500
The hammer mechanisms can be selected depending on the applications.

One hammer clutch

mc-onh.jpg

  • Using the inertia from one rotation, maximum power is achived.

Twin hammer clutch

mc-twh.jpg

  • The originally designed 2 piece of hammer conveys the motor power to the avil efficeintly.
  • Well balanced power between impact and output power.

Pin less hammer clutch

mc-plh.jpg

  • The impact power is directly conveyed to anvil by unifying the hammer and the hammer pin.
  • The pin less clutch mechanism is Toku's original development.

New dynapact clutch

mc-dyp.jpg

  • Hammer pins rotating and develops a reciprocating movement at the time impacts the anvil directly. This mechanism increases the number of impacts to its maximum, allowing ｔhe tool to achieve its maximum torque very quickly and effciently.

♦ Specifications: Impact Wrench (¾")
Model Drive
(in)		 Bolt
Size
(mm)		 Torque
Range
(kg m)		 Max
Torque
(kg m)		 Net
Weight
(kg)		 Overall
Length
(mm)		 Center
Height
(mm)		 Free
Speed
(rpm)		 Air Cons
Free
(m³/min)		 Air Cons
Load
(m³/min)		 Air
Inlet
(PT)		 Hose
Size
(in)
MI-2000P 3/4 20 35-65 75 4.4 224 42 5,500 1.1 0.7 3/8 3/8
MI-2000GS 3/4 20 35-65 75 5.2 309 42 5,500 1.1 0.7 3/8 3/8
MI-2000GL 3/4 20 35-65 75 5.6 420 42 5,500 1.1 0.7 3/8 3/8
MI-20P 3/4 22 40-80 100 3.9 220 41.7 5,000 1.1 0.7 3/8 3/8
MI-2500P 3/4,1 25 50-110 130 8.2 265 50 5,300 1.2 0.7 3/8 1/2
MI-2500GS 3/4,1 25 50-110 130 8.2 341 50 5,300 1.2 0.7 3/8 1/2
MI-2500GL 3/4,1 25 50-110 130 9.0 460 50 5,300 1.2 0.7 3/8 1/2
*Specifications; Operating air pressure based on 0.6 MPa.

♦ Specifications: Impact Wrench (1" and 1-1/2")
Model Drive
(in)		 Bolt
Size
(mm)		 Torque
Range
(kg m)		 Max
Torque
(kg m)		 Net
Weight
(kg)		 Overall
Length
(mm)		 Center
Height
(mm)		 Free
Speed
(rpm)		 Air Cons
Free
(m³/min)		 Air Cons
Load
(m³/min)		 Air
Inlet
(PT)		 Hose
Size
(in)
MI-38GS 1 38 50-110 180 7.2 339 49 3,700 1.2 0.7 1/2 1/2
MI-38GL 1 38 50-110 180 7.9 498 49 3,700 1.2 0.7 1/2 1/2
MI-3800P 1 38 50-150 200 9.5 276 55 4,700 1.6 1.0 1/2 1/2
MI-3800GS 1 38 50-150 200 9.5 355 55 4,700 1.6 1.0 1/2 1/2
MI-3800GL 1 38 50-150 200 10.2 504 55 4,700 1.6 1.0 1/2 1/2
MI-42GS 1 42 50-180 260 10.2 370 55 3,900 1.9 1.0 1/2 1/2
MI-42GL 1 42 50-180 260 10.6 519 55 3,900 1.9 1.0 1/2 1/2
MI-5000P 1 50 50-220 270 13.9 310 60 3,700 1.9 1.0 1/2 1/2
MI-5000GS 1 50 50-220 270 14.3 460 60 3,700 1.9 1.0 1/2 1/2
MI-5000GL 1 50 50-220 270 16.0 594 60 3,700 1.9 1.0 1/2 1/2
MI-5500 1-1/2 55 150-428 560 18.1 520 60 2,800 1.25 0.90 1/2 1/2
*Specifications; Operating air pressure based on 0.6 MPa.

MI-2000P

MI-2000PMI-2000P pin less

MI-2000GS/GL

MI-2000GLMI-2000GS/GL pin less

MI-20P

MI-20PMI-20P twin hammer

MI-2500P

MI-2500PMI-2500P pin less

MI-2500GL

MI-2500GLMI-2500GL pin less

MI-3800P

MI-3800PMI-3800P pin less

MI-3800GL

MI-3800GLMI-3800GL pin less

MI-38GL

MI-38GLMI-38GL twin hammer

MI-42GS

MI-42GSMI-42GS twin hammer

MI-42GL

MI-42GLMI-42GL twin hammer

MI-5000P

MI-5000PMI-5000P pin less

MI-5000GL

MI-5000GLMI-5000GL pin less

MI-5500

MI-5500MI-5500 new dynapact