TOKU impact wrench 3/8,1/2

MI-12P, MI-1600P, MI-16M(RH)1/2,3/8, MI-1311B, MI-1310S, MI-17HE

The hammer mechanisms can be selected depending on the applications.

One hammer clutch

mc-onh.jpg

  • Using the inertia from one rotation, maximum power is achived.

Twin hammer clutch

mc-twh.jpg

  • The originally designed 2 piece of hammer conveys the motor power to the avil efficeintly.
  • Well balanced power between impact and output power.

Pin less hammer clutch

mc-plh.jpg

  • The impact power is directly conveyed to anvil by unifying the hammer and the hammer pin.
  • The pin less clutch mechanism is Toku's original development.

New dynapact clutch

mc-dyp.jpg

  • Hammer pins rotating and develops a reciprocating movement at the time impacts the anvil directly. This mechanism increases the number of impacts to its maximum, allowing the tool to achieve its maximum torque very quickly and effciently.

♦ Specifications: Impact Wrench (⅜"-½")
Model Drive
(in)
Bolt
Size
(mm)
Torque
Range
(kg m)
Max
Torque
(kg m)
Net
Weight
(kg)
Overall
Length
(mm)
Center
Height
(mm)
Free
Speed
(rpm)
Air Cons
Free
(m³/min)
Air Cons
Load
(m³/min)
Air
Inlet
(PT)
Hose
Size
(in)
MI-1311B 3/8 10 3-7 10 1.3 150 24.0 7,000 0.45 0.35 1/4 3/8
MI-1310S 3/8 10 1-9 12 0.91 177 30.0 12,500 0.40 0.30 1/4 3/8
MI-12P 3/8 12 5-11 12 1.2 150 25.3 9,500 0.50 0.40 1/4 3/8
MI-16M (⅜) 3/8 13 5-15 23 1.5 170 27.5 7,200 0.62 0.40 1/4 3/8
MI-16M (½) 1/2 16 15-25 33 1.5 170 27.5 7,200 0.62 0.40 1/4 3/8
MI-1600P 1/2 16 20-40 45 2.6 180 32.5 6,500 0.74 0.50 1/4 3/8
MI-17HE 1/2 16 25-45 R55 L60 2.5 179 33.0 5,500 0.60 0.50 1/4 3/8
*Specifications; Operating air pressure based on 0.6 MPa.

MI-12P

MI-12.jpgMI-12P twin hammer

MI-16M(RH) 1/2, 3/8

070316-MI-16.jpgMI-16M(RH)1/2, 3/8 twin hammer

MI-1311B

MI-1311B.jpgMI-1311B one hammer

MI-1600P

MI-1600.jpgMI-1600P pin less

MI-1310S

MI-1310SBIND.jpgMI-1310S one hammer

MI-17HE

MI-17HE.jpgMII-17HE twin hammer