-   Thank you for coming to Bauma CHINA 2018  -

Exhibited Hydraulic Breakers and Attachments

▪ Show Date: November 27 (Tue) to 30 (Fri) 2018

▪ Venue: Shanghai New International Exhibition Centre

Toku Pneumatic Co.,Ltd. and Chinese subsidiaries, Shanghai Toku International Co.,Ltd., attended "bauma CHINA 2018", one of the largest construction show in the world.

We thank you very much everyone for coming all the way to visit our booth.

The show was so successful and we will keep introducing our products into Chinese market.

-   Thank you for coming TOKU booth at AMPA MYANMAR 2018  -


AMPA Myanmar 2018 : Myanmar International Auto Parts, Accessories & Motor Show

   ▪ Show Date: September 27th - 30th (Thu. - Sun.)

   ▪ Venue: Yangon Convention Center

  We thank you for all the people visited our booth at AMPA Myanmar 2018.

  The show was so successful and we will keep introducing our products into this growing Myanmar market.

Products Exhibited

  1. 1. TCA-7: Pick Hammer
  2. 2. THA-3B: Chipping Hammer
  3. 3. TAG-40MR: 4" Angle Grinder
  4. 4. TAG-700QJL: 7" Angle Grinder
  5. 5. MR-2310B: 3/8"sq Ratchet Wrench
  6. 6. MI-14S: 3/8"sq Impact Wrench
  1. 7. MI-16M: 1/2"sq Impact Wrench
  2. 8. MI-17C: 1/2"sq Impact Wrench
  3. 9. MI-17M: 1/2"sq Impact Wrench
  4. 10. MI-5000GL: 1"sq Impact Wrench
  5. 11. MD-3311B: 3/8" Air Drill
  6. 12. TCS-500P: 490kg capacity Air Hoist

-  N-Expo (New Environmental Exposition 2017) just started in Tokyo!! (Booth: East 3 Hole No.A343)  -

Attachments including hydraulic breakers, attachments, hand held pneumatic tools and air tools are exhibited.

We, Toku present wide range of attachments including hydraulic breakers, primary crushers, secondary crushers, cutters, etc.
And also hand held pneumatic breakers and air tools are exhibited.

We look forward to seeing you at our booth!!

【N-EXPO (New Environmental Exposition 2017)】

 ▪ Date: May 23 - 26 (Tue.-Fri.)

 ▪ Venue: Tokyo Big Sight (Tokyo International Exhibition Center)

 ▪ Booth: East 3 Hole A343

 ▪ Go to N-Expo page


-  Thanks for coming Automechanika 2017 in New Delhi -


We exhibited air hoist and airtools at Automechanika 2017 New Delhi held in March 21-24, 2017. Many visitors came to our booth and especially TCS-500, high speed air chain hoist did attract much attention. We appreciate all the visitors came to our booth.

-  Toku America, Inc. participated in CONEXPO-CON/AGG 2017  -

We participated in CONEXPO-CON/AGG 2017 held in March 6th-11th, 2017 in Las Vegas.

CONEXPO is one of the largest construction Expo in the world that held every three years in the United States.

Attachments including hydraulic breakers and hand held tools were exhibited.

We, Toku presented wide range of attachments including hydraulic breakers, compactors, mechanical pulverizers, compaction wheel, etc, and also our hydraulic and pneumatic hand held tools were exhibited.

We had many visitors at our booth and could receive positive market feedback during the show. The exhibition was a great success and we really appreciate your time to visit our booth at CONEXPO-CON/AGG 2017.


-  Toku America participated in 2017 ARA show in Orlando FL  -

Exhibited Various Attachments

Toku America Inc. participated in 2017 ARA show held in February 26 - March 1st in Orlando FL.

Over 670 companies exhibited in the show, and many visitors came to our booth.

Various attachments such as hydraulic breakers, compactors, hydraulic auger drill etc. were presented.

We sincerely appreciated all the visitors and will keep our efforts to contribute to the market through our products.


-  Thanks for coming TOKU booth at N-Expo 2016 in Tokyo  -

1st participation with the largest booth!

We participated in this show for the first time with the largest booth in this show.

158,000 people visited this show in all 4 days (from May 24th to May 27th), and also we had lots of visitors with enjoyable time.

We sincerely express our thanks for all visitors.

- Main products exhibited and introduced -

  ▸ Hydraulic Breakers (Silenced type)

  ▸ Primary Crushers, Secondary Crushers, Cutters, Graspers, etc.

  ▸ New attachment IoT systems


-  Toku America participated in 2016 ARA show in ATLANTA. Feb. 21-24, 2016 -

STRIKER hydraulic breakers for skid steer loader

The ARA rental show 2016 was successfully kicked off in Atlanta GA USA as 60th anniversary of American Rental Association.

About 650 companies including Toku America Inc. participated in this show.

At TOKU booth, STRIKER hydraulic breakers for skid steer loader were exhibited and many customers payed great attention to the STRIKERS.

We appreciate your time to visit our booth and look forward to seeing you next year in Orlando!


-  TOKU America Inc. participated in ARA show 2015 -

STRIKER brand of hydraulic attachments in ARA show

The 59th ARA(American Rental Association) show has been held 22nd-25th Feb 2015 in New Orleans USA.

675 exhibitors joined this show. The number of visitors was slowly getting increased in spite of deep freeze weather, and in the end the number of visitors has become added for 6 years in a row reflecting the booming of US business air.

The show is organized by American Rental Association and Toku America had many visitors who belong to this organization like rental industry people and sales representatives.

TNB-5M hydraulic breaker, TDX-40 hydraulic cutter, compactors were exhibited.


-  BAUMA CHINA 2014 -

Shanghai Toku participated in BAUMA CHINA exhibiting various attachments

We participated in Bauma China held in Nov. 25th-28th, 2014 in Shanghai.

We exhibited TNB series hydraulic breakers, T series primary crushers, TM series secondary crushers, and new LH series grapples, in which lots of customers expressed their interests.

That was successful show bringing up the image of huge market size and much more potential of Chinese market for the future.

We would thank all the visitors and will continue supplying high quality products for the various market needs enforcing our product lineup.